4
that sparks fly away from you and other
persons or flammable materials.
19.
Pay attention that the wheel continues to
rotate after the tool is switched off.
20.
Do not touch the workpiece immediately after
operation; it may be extremely hot and could
burn your skin.
21.
Position the tool so that the power cord
always stays behind the machine during
operation.
22.
If working place is extremely hot and humid, or
badly polluted by conductive dust, use a
short-circuit breaker (30 mA) to assure
operator safety.
23.
Do not use the tool on any materials
containing asbestos.
24.
Do not use water or grinding lubricant.
25.
Ensure that ventilation openings are kept clear
when working in dusty conditions. If it should
become necessary to clear dust, first
disconnect the tool from the mains supply
( use non metallic objects ) and avoid
damaging internal parts.
26.
When use cut-off wheel, always work with the
dust collecting wheel guard required by
domestic regulation.
27.
Cutting discs must not be subjected to any
lateral pressure.
SAVE THESE INSTRUCTIONS.
FUNCTIONAL DESCRIPTION
CAUTION:
•
Always be sure that the tool is switched off and
unplugged before adjusting or checking function on
the tool.
Shaft lock
1
006019
CAUTION:
•
Never actuate the shaft lock when the spindle is
moving. The tool may be damaged.
Press the shaft lock to prevent spindle rotation when
installing or removing accessories.
Switch action
1
003568
CAUTION:
•
Before plugging in the tool, always check to see
that the switch lever actuates properly and returns
to the ''O(OFF)'' position when the rear of the
switch lever is depressed.
To start the tool, slide the switch lever toward the ''I
(ON)'' position. For continuous operation, press the front
of the switch lever to lock it. To stop the tool, press the
rear of the switch lever, then slide it toward ''O (OFF)''
position.
ASSEMBLY
CAUTION:
•
Always be sure that the tool is switched off and
unplugged before carrying out any work on the
tool.
Installing side grip
007955
CAUTION:
•
Always be sure that the side grip is installed
securely before operation.
Screw the side grip securely on the position of the tool
as shown in the figure.
1. Slide switch
lever
1. Press
Summary of Contents for M962
Page 7: ...7 ...