background image

FUNCTIONAL DESCRIPTION 

 

CAUTION: 

• 

Always be sure that the tool is switched off and 
unplugged before adjusting or checking function 
on the tool. 

Shaft lock 

 

CAUTION: 

• 

Never actuate the shaft lock when the spindle is 
moving. The tool may be damaged. 

1

 

 

015066 

Press the shaft lock to prevent spindle rotation when 
installing or removing accessories. 

Switch action 

 

CAUTION: 

• 

Before plugging in the tool, always check to see 
that the switch trigger actuates properly and 
returns to the "OFF" position when released. 

1

2

 

 

015067 

For tool without lock button 

To start the tool, simply pull the switch trigger. Release 
the switch trigger to stop. 

For tool with lock button 

 

CAUTION: 

• 

Switch can be locked in "ON" position for ease of 
operator comfort during extended use. Apply 
caution when locking tool in "ON" position and 
maintain firm grasp on tool. 

To start the tool, simply pull the switch trigger. Release 
the switch trigger to stop. 
For continuous operation, pull the switch trigger and 
then push in the lock button. 

To stop the tool from the locked position, pull the switch 
trigger fully, and then release it. 

ASSEMBLY 

 

CAUTION: 

• 

Always be sure that the tool is switched off and 
unplugged before carrying out any work on the 
tool. 

Installing side grip (handle) 

 

CAUTION: 

• 

Always be sure that the side grip is installed 
securely before operation. 

   

015068 

Screw the side grip securely on the position of the tool 
as shown in the figure. 

Installing or removing wheel guard   
(For depressed center wheel/Multi disc)   

 

CAUTION: 

• 

When using a depressed center grinding 
wheel/Multi-disc, the wheel guard must be fitted on 
the tool so that the closed side of the guard always 
points toward the operator. 

1

2

3

 

 

015069 

Mount the wheel guard with the protrusion on the wheel 
guard band aligned with the notch on the bearing box. 
Then rotate the wheel guard to such an angle that it can 
protect the operator according to work. Be sure to 
tighten the screw securely. 
To remove wheel guard, follow the installation 
procedure in reverse. 

 
 

1. Wheel guard 
2. Screw 
3. Bearing box 

1. Lock button 
2. Switch trigger 

1. Shaft lock 

Summary of Contents for M9003













Reviews: