Fig. 35
[3] DISASSEMBLY/ASSEMBLY
[3]-5. Torsion spring 6 for Connector, Battery housing
ASSEMBLING
R
epair
P 1
2
/
25
A
B
C
Cushion
rubber (R)
Cushion rubber (L)
(behind Terminal)
Rubber pin 5
Pin 1.5
See
Fig. 35
.
Set Torsion spring 6 into Housing L, and then assemble Connector to Compression spring 6. Refer to A .
Set Opener in place. Refer to B .
When Battery housing L and R are matched, do not fail to assemble the parts shown in C .
Hold one end of
Torsion spring 6
with the inner wall of Housing L.
Align the chamfered side
of
Opener
with the walls
of Housing L.
Insert the hinge of
Connector
into the coil of Torsion spring 6.
Hook the opposite end
of Torsion spring with
the step of Housing L.
Battery housing set
(Housing set)
Cushion
Opener
