7
OPERATION
CAUTION:
•
Be careful not to accidentally contact a metal fence
or other hard objects while trimming. The blade will
break and may cause serious injury.
•
Overreaching with a hedge trimmer, particularly
from a ladder, is extremely dangerous. Do not work
from anything wobbly or infirm.
007559
Do not attempt to cut branches thicker than 10 mm
diameter with this trimmer. These should first be cut with
shears down to the hedge trimming level.
CAUTION:
•
Do not cut off dead trees or similar hard objects.
Failure to do so may damage the tool.
012484
Hold the trimmer with both hands and pull the switch
trigger A or B and then move it in front of your body.
1
2
3
012485
As a basic operation, tilt the blades towards the trimming
direction and move it calmly and slowly at the speed rate
of 3 - 4 seconds per meter.
1
012486
To cut a hedge top evenly, it helps to tie a string at the
desired hedge height and to trim along it, using it as a
reference line.
012487
Attaching the chip receiver (optional accessory) on the
tool when trimming the hedge straight can avoid cut off
leaves’ being thrown away.
012488
To cut a hedge side evenly, it helps to cut from the
bottom upwards.
012489
Trim boxwood or rhododendron from the base toward
the top for a nice appearance and good job.
1. String
1. Trimming
direction
2. Hedge surface
to be trimmed
3. Tilt the blades
