Makita LXHU02 Instruction Manual Download Page 5

breakdown. 

6. 

Do not store the tool and battery cartridge in 
locations where the temperature may reach or 
exceed 50

C (122

F). 

7. 

Do not incinerate the battery cartridge even if it 
is severely damaged or is completely worn out. 
The battery cartridge can explode in a fire. 

8. 

Be careful not to drop or strike battery.   

9. 

Do not use a damaged battery.   

SAVE THESE INSTRUCTIONS. 

Tips for maintaining maximum battery life 

1. 

Charge the battery cartridge before 
completely discharged. 
Always stop tool operation and charge the 
battery cartridge when you notice less tool 
power. 

2. 

Never recharge a fully charged battery 
cartridge. 
Overcharging shortens the battery service life. 

3. 

Charge the battery cartridge with room 
temperature at 10

C - 40

C (50

F - 104

F). 

Let a hot battery cartridge cool down before 
charging it. 

4. 

Charge the battery cartridge once in every six 
months if you do not use it for a long period of 
time. 

 
 
 
 
 
 
 
 
 
 
 
 
 

FUNCTIONAL DESCRIPTION 

 

CAUTION: 

• 

Always be sure that the tool is switched off and the 
battery cartridge is removed before adjusting or 
checking function on the tool. 

Installing or removing battery cartridge 

 

CAUTION: 

• 

Hold the tool and the battery cartridge firmly 
when installing or removing battery cartridge.

 

Failure to hold the tool and the battery cartridge 
firmly may cause them to slip off your hands and 
result in damage to the tool and battery cartridge 
and a personal injury. 

1

2

3

 

 

012445 

• 

Always switch off the tool before installing or 
removing of the battery cartridge. 

• 

To remove the battery cartridge, slide it from the tool 
while sliding the button on the front of the cartridge. 

• 

To install the battery cartridge, align the tongue on 
the battery cartridge with the groove in the housing 
and slip it into place. Always insert it all the way 
until it locks in place with a little click. If you can 
see the red indicator on the upper side of the 
button, it is not locked completely. Install it fully 
until the red indicator cannot be seen. If not, it may 
accidentally fall out of the tool, causing injury to 
you or someone around you. 

Do not use force when installing the battery cartridge. If 
the cartridge does not slide in easily, it is not being 
inserted correctly. 

Battery protection system   
(Lithium-ion battery with star marking) 

1

 

 

012128 

1. Star marking 

1. Red indicator 
2. Button 
3. Battery 

cartridge 

Summary of Contents for LXHU02





































Reviews: