Fig. 6-7
7)
Put the main frame on its side.
Mount Torsion spring 33 (78) as
shown below.
Note:
If it is reversely mounted, Spring
does not work properly.
Fig. 6-8
8)
Insert M6x16 H.S.Set screw (63) into Gear housing. Then adjust this Screw
so that the main body can move up and down surely and fully.
M6x16 H.S.Set screw (63)
Fig. 6-9
9)
Assemble Spark Guard (81) to Base (86) while pressing in the direction of the arrows.
Fig. 6-10
Note:
To prevent melting by heated chips, Cushion (83) is not
installed at Spark guard (81) position.
Spark guard (81)
Cushion (83)
Base (86)
Spark guard
Spark guard
Spark guard
Base
Base
Base
Makita Corporation
12
/
15
