Makita LM2350 Instruction Manual Download Page 11

11

NOTE:

• Whilst lapping, do not operate the Mowing/Lapping Flip 

Switch.

• Doing so may cause damage.
7. Unplug the power cord and then turn over the main 

unit, and return to procedure No. 1., in order to repeat 
lapping.
After repeating the above two or three times, perform 
lapping adjustment using lapping adjustment screws, 
and then check to see that the blades can cut a piece 
of newspaper (newspaper should be at right angle to 
fixed blade when lowered into blades). If not, perform 
the lapping operation again.

8. After full completion of lapping, use a cloth to wipe off 

the remaining lapping compound from the spiral-
shaped blades and fixed blade.
If the lapping compound is not wiped off properly, it 
may cause blades to lose their cutting edges. 

1. Turn the pulley

9. Next, after setting the Mowing/Lapping Flip Switch to 

mowing position, commence mowing. (See P10 for 
details.)

Electric lawn mower upkeep

• After mowing, use a dry cloth or cloth dipped in soapy 

water to wipe clean the electric lawn mower. Also, use 
a soft brush or other such tool to brush off grass 
cuttings and dirt from blade.

 CAUTION:

Never use gasoline, benzine, thinner, alcohol or the like. 
Discoloration, deformation or cracks may result.

NOTE:

To maintain product SAFETY and RELIABILITY, repairs, 
carbon brush inspection and replacement, any other 
maintenance or adjustment should be performed by 
Makita Authorized Service Centers, always using Makita 
replacement parts.
• After mowing, clean away grass and dirt from locations 

such as intake duct. Failure to do so may cause loss of 
grass collecting efficiency and cooling capability.

• When lapping blades, do not let lapping compound get 

onto the main unit. If it does, it may cause discoloring, 
misshaping and/or cracking.

OPTIONAL ACCESSORIES

CAUTION:

• These accessories or attachments are recommended 

for use with your Makita tool specified in this manual. 
The use of any other accessories or attachments might 
present a risk of injury to persons. Only use accessory 
or attachment for its stated purpose.

If you need any assistance for more details regarding 
these accessories, ask your local Makita Service Center.
• Lawn mower blade (Cylinder blade)
• Waist cord hook

NOTE:

• Some items in the list may be included in the tool 

package as standard accessories. They may differ from 
country to country.

1

Summary of Contents for LM2350













Reviews: