Makita LH1201FL/2, Instruction Manual

Page: 8 / 20

8
Lighting up the lamps
1
012183
Push the upper position of the switch for turning on the
light and the lower position for off.
CAUTION:
•
Do not look in the light or see the source of light directly.
NOTE:
•
Use a dry cloth to wipe the dirt off the lens of lamp.
Be careful not to scratch the lens of lamp, or it may
lower the illumination.
Laser beam action
1
012184
CAUTION:
•
LASER RADIATION
Do not stare into beam.
To turn on the laser beam, press the upper position (I) of
the switch. To turn off the laser beam, press the lower
position (0) of the switch.
Adjusting the up and down of top table
1
2
015680
To adjust the up and down of top table, loosen two levers
by turning counterclockwise and then turn the knob. To
raise the top table, turn the knob clockwise. To lower
the top table, turn the knob counterclockwise. Tighten
these levers firmly after the adjustment.
WARNING:
•
Position the top table at the topmost position when
using the tool in the miter saw mode and at the
desired position when using in the table saw mode
(bench mode).
ASSEMBLY
CAUTION:
•
Always be sure that the tool is switched off and
unplugged before carrying out any work on the
tool.
Installing or removing saw blade
CAUTION:
•
Always be sure that the tool is switched off and
unplugged before installing or removing the blade.
•
Use only the Makita socket wrench provided to
install or remove the blade. Failure to do so may
result in overtightening or insufficient tightening of
the hex bolt. This could cause an injury.
Secure the top table at the topmost position.
Lock the handle in the raised position by pushing in the
stopper pin.
1
012188
5
1
2
4
3
012189
Then use the socket wrench to loosen the hex bolt
holding the center cover by turning it counterclockwise.
Raise the lower blade guard A and center cover while
pushing the lever nearby the handle to the left.
1. Lever
2. Knob
1. Lower blade
guard A
2. Lower blade
guard B
3. Top table
4. Motor housing
5. Handle
1. Stopper pin
1. Switch for laser
1. Lamp