R
epair
[3] DISASSEMBLY/ASSEMBLY
[3]-3. Front base, Base (rear)
DISASSEMBLING
ASSEMBLING
Fig. 16
Fig. 15
(1) Front base and Bas (rear) can be removed as illustrated in
Fig. 15.
1) Assemble Foot to Base (rear) before assembling Base to Main frame as illustrated in
Fig. 16
.
2) Assemble the Base with Foot to Main frame. And assemble Front base section to Main frame complete.
No need to assemble retaining ring S-8 to thread portion of Front base in this step. Refer to
Fig. 15
.
1R263
1R263
Knob cover
Remove Knob cover by levering up
with 1R263.
Retaining ring S-8, M10 Hex nut and
thread portion of Front base come
into sight.
Knob
Knob
Knob
Knob
Retaining ring S-8
Remove Retaining ring S-8
with 1R004 from thread portion
of Front base.
Thread portion
of Front base
M10 Hex nut
M10 Hex nut
Knob cover
Use Knob cover as a socket wrench
temporarily for removing M10 Hex nut.
Turn Knob cover counterclockwise
while fixing Knob by hand.
M10 Hex nut can be removed from
the thread of Front base.
Front base
Compression spring 18
Base (rear)
Foot can be removed
in separating Base from
Main frame complete.
Remove Base (rear) by unscrewing four 4x18
Tapping screws.
4x18 Tapping
screw (4pcs.)
Front base can be removed as illustrated below.
Foot
Pass the long pin of Foot through Torsion spring 7.
Hook this tail
with Foot.
Long pin
of Foot
Torsion spring 7
Foot
Hook this tail with
Base (rear).
Base (rear)
P
6
/
8
