P 10/ 12
W
iring diagram
[1] Protecting the Interconnecting Lead Wire with Heat-Shrink Tube
[2] Wiring in Motor Housing
In case that noise suppressor is used, protect the lead wire that interconnects between noise suppressor and field core
using polyolefin heat-shrink tube. Be sure to cover the crimped portion as illustrated in Fig. 25.
Polyolefin heat-shrink tube
(before shrinkage)
crimped portion
Lead wire (clear) that interconnects
between noise suppressor and
field core
Non-insulated
terminal
Fig. 25
Polyolefin heat-shrink tube
(after shrinkage)
[Before shrinkage]
[After shrinkage]
[2] -1. Front Side;
Routing the Lead Wire Interconnecting Between Noise Suppressor and Field Core
Fig. 26
(View from baffle plate side)
Secure the non-insulated terminal
of the interconnecting lead wire
with the screw that fastens field
to motor housing.
Polyolefin heat-shrink tube
Lead wire (clear) interconnecting
between noise suppressor and
field core
Route the lead wire
through this opening.
