P
6
/2
4
[3] DISASSEMBLY/ASSEMBLY
[3] -1A. Chuck Section (Model HR3210FCT)
R
epair
DISASSEMBLY
Fig. 8
Fig. 9
Fig. 11
Retaining
ring S-28
Tool holder
Tool
holder
Change ring
Change ring
Washer 28
1R269
1. Remove Retaining ring 28 with 1R269 while
pressing down Washer 28.
Note: Keep to press Washer 28 until it is removed so
as not to be slung by Compression spring 42.
2. Disassemble Washer 28 slowly.
3. Remove Compression spring 42.
1. Remove Ring spring 34 from Change ring.
2. Remove Change cover.
3. Remove Flat washer 37 from the rim portion
of Change ring.
4. Remove Change ring from Tool holder.
Washer 28
Compression
spring 42
Flat washer 37
Ring
spring 34
Ring spring
34
Change ring
Change cover
Tool holder
1R003
Tool holder cap
Chuck cover
Ring
spring 19
Guide
washer
Guide
washer
Tool
holder
Conical compression
spring 22-32
Chuck
cover
Ring 21
Steel ball 7
Steel Ball 7: 2 pcs.
Guide washer
Screwdriver
magnetized
with 1R288
Tool holder
Tool holder
Remove Tool holder cap
with Slotted screwdriver.
Chuck cover can be
removed by hand.
And then, remove
Ring spring 19.
Ring 21 can be removed.
Remove Steel ball 7 with
magnetized Screwdriver
while pressing down
Guide washer.
Remove Guide washer
and Conical compression
spring 22-32.
Tool holder cap
Tool holder
Flat washer 37
Washer 28
Guide washer
Change ring
Change cover
Retaining
ring S-28
Chuck cover
Conical
compression
spring 22-32
Compression
spring 42
Steel ball 7
Ring spring 19
Ring 21
Ring spring 34
Disassemble as illustrated in Fig. 11.
Disassemble as illustrated in Figs. 9 and 10.
2) The construction of Tool holder assembly is as illustrated in Fig. 8. The rear parts can be disassembled as illustrated in
Figs. 9 and 10. And disassemble the front Parts as illustrated in Fig. 11.
Fig. 10
