![background image](http://html1.mh-extra.com/html/makita/hr2452/hr2452_technical-information_4195399005.webp)
R
epair
P 5 / 19
< 1 > Lubrication
Apply the following MAKITA grease to protect parts and product from unusual abrasion.
* Grease RA No.1 (Brown) to the portions marked with black triangle
* Grease FA No.2 to the portions marked with gray triangle
* Disulphide molybdenum alloyed grease to the portion marked with white triangle
Cap 35
Change lever
Change lever
O ring 17
O ring 17
Spur gear 51
Piston cylinder
Piston cylinder
Gear housing
Needle baring
O ring 68
O ring 68
Piston joint
Inner housing
Inner housing
Helical gear 26
Helical gear 26
Spur gear 10
Spur gear 10
Clutch cam
Clutch cam
Swash bearing
Swash bearing 10
Tool holder
Tool holder
Steel ball 7.0
Steel ball 7.0
Cap 35
Inner lip of bit inserting side
Inner ring
Inner portion where tool holder contacts
Convex portion of cam
Inner portion where piston cylinder contacts
The portion where inner housing contacts
Inner portion where striker contacts
The portion where piston joint is assembled
Inner portion where tool holder contacts
The groove where O ring 68 is assembled
Inner portion where cam shaft contacts
The surface where helical gear 26 contacts
The portion where balls are installed
Convex portion of cam
Spiral portion
The hole where cam shaft contacts
Top of the pins
Whole part
Whole part
Whole part
Inner portion where the mechanical parts are installed.
Groove for O ring 17 assembling portion
Spur gear 51
Gear housing
Needle bearing
Grease RA No.1 (Brown)
Grease RA No.1 (Brown)
Grease RA No.1 (Brown)
Grease RA No.1 (Brown)
Grease RA No.1 (Brown)
Grease RA No.1 (Brown)
Grease RA No.1 (Brown)
Grease RA No.1 (Brown)
Grease RA No.1 (Brown)
Grease RA No.1 (Brown)
Grease RA No.1 (Brown)
Grease RA No.1 (Brown)
Grease RA No.1 (Brown) : 60g
Convex portion of cam
Disulphide molybdenum alloyed grease
Whole of groove portion
Cam shaft
Grease FA No.2
Grease FA No.2
Whole of teeth portion