![background image](http://html.mh-extra.com/html/makita/hr140d/hr140d_instruction-manual_230976006.webp)
6 ENGLISH
ENGLISH (Original instructions)
SPECIFICATIONS
Model:
HR140D
Drilling capacities
Concrete
14 mm
Steel
10 mm
Wood
13 mm
No load speed
0 - 850 min
-1
Blows per minute
0 - 4,900 min
-1
Overall length
246 mm
Rated voltage
D.C. 10.8 V - 12 V max
Net weight
1.9 - 2.6 kg
•
Due to our continuing program of research and development, the specifications herein are subject to change
without notice.
•
Specifications may differ from country to country.
•
The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heavi
-
est combinations, according to EPTA-Procedure 01/2014, are shown in the table.
Applicable battery cartridge and charger
Battery cartridge
BL1016 / BL1021B / BL1041B
Charger
DC10SA / DC10SB / DC10WC / DC10WD / DC18RE
•
Some of the battery cartridges and chargers listed above may not be available depending on your region of
residence.
WARNING:
Only use the battery cartridges and chargers listed above.
Use of any other battery cartridges
and chargers may cause injury and/or fire.
Intended use
The tool is intended for hammer drilling and drilling in
brick, concrete and stone.
It is also suitable for drilling without impact in wood,
metal, ceramic and plastic.
Noise
The typical A-weighted noise level determined accord
-
ing to EN62841-2-6:
Sound pressure level (L
pA
) : 84 dB (A)
Sound power level (L
WA
) : 95 dB (A)
Uncertainty (K) : 3 dB (A)
NOTE:
The declared noise emission value(s) has
been measured in accordance with a standard test
method and may be used for comparing one tool with
another.
NOTE:
The declared noise emission value(s)
may also be used in a preliminary assessment of
exposure.
WARNING:
Wear ear protection.
WARNING:
The noise emission during actual
use of the power tool can differ from the declared
value(s) depending on the ways in which the
tool is used especially what kind of workpiece is
processed.
WARNING:
Be sure to identify safety mea-
sures to protect the operator that are based on an
estimation of exposure in the actual conditions of
use (taking account of all parts of the operating
cycle such as the times when the tool is switched
off and when it is running idle in addition to the
trigger time).
Vibration
The following table shows the vibration total value
(tri-axial vector sum) determined according to applica
-
ble standard.
Work mode
Vibration
emission
Uncertainty (K) Applicable
standard /
Test condition
Hammer
drilling into
concrete
(a
h, HD
)
7.0 m/s
2
1.5 m/s
2
EN62841-2-6
7.7 m/s
2
2.3 m/s
2
Recommended
practical
operation*
Summary of Contents for HR140D
