background image

FUNCTIONAL DESCRIPTION 

 

CAUTION: 

• 

Always be sure that the tool is switched off and 
unplugged before adjusting or checking function on 
the tool. 

 

Switch action 

1

2

 

 

009238 

CAUTION: 

• 

Before plugging in the tool, always check to see 
that the switch trigger actuates properly and 
returns to the "OFF" position when released. 

• 

Switch can be locked in "ON" position for ease of 
operator comfort during extended use. Apply 
caution when locking tool in "ON" position and 
maintain firm grasp on tool. 

To start the tool, simply pull the switch trigger. Tool 
speed is increased by increasing pressure on the switch 
trigger. Release the switch trigger to stop. 
For continuous operation, pull the switch trigger and 
then push in the lock button. 
To stop the tool from the locked position, pull the switch 
trigger fully, then release it. 

 

Lighting up the lamps 

For Model HP1640F,HP1641F 

1

 

 

009245 

CAUTION: 

• 

Do not look in the light or see the source of light 
directly. 

To turn on the lamp, pull the trigger. Release the trigger 
to turn it off. 

 

 

 

 

NOTE: 

• 

Use a dry cloth to wipe the dirt off the lens of lamp. 
Be careful not to scratch the lens of lamp, or it may 
lower the illumination. 

• 

Never use gasoline or thinner to clean the lens of 
the lamp, or it will be damaged. 

 

Reversing switch action 

1

A

B

 

 

009239 

This tool has a reversing switch to change the direction 
of rotation. Move the reversing switch to the

position 

(A side) for clockwise rotation or the

position (B side) 

for counterclockwise rotation. 

 

CAUTION: 

• 

Always check the direction of rotation before 
operation. 

• 

Use the reversing switch only after the tool comes 
to a complete stop. Changing the direction of 
rotation before the tool stops may damage the tool. 

• 

If the switch trigger can not be depressed, check to 
see that the reversing switch is fully set to 
position

 (A side) or

(B side). 

 

Selecting the action mode 

1

 

 

009240 

This tool has an action mode change lever. For rotation 
with hammering, slide the action mode change lever to 
the right (

symbol). For rotation only, slide the action 

mode change lever to the left ( symbol). 

 

CAUTION: 

• 

Always slide the action mode change lever all the 
way to your desired mode position. If you operate 
the tool with the lever positioned halfway between 
the mode symbols, the tool may be damaged. 

 

 

1. Action mode 

changing lever 

1. Reversing 

switch 

1. Lamp 

1. Switch trigger
2. Lock button 

Summary of Contents for HP1640K









Reviews: