R
epair
P 8 / 12
< 8 > Mounting armature
( 1 ) Hold cam holder complete as illustrated in Fig. 21.
< Note >
The cam portion has not to come on the supporter. Otherwise, it is impossible to hold
cam holder complete horizontally.
( 2 ) Mount armature assembly to cam holder complete by pressing with arbor press. See Fig. 22.
Something to hold
cam older complete
Something to hold
cam holder complete
Cam holder complete
Cam portion
Fig. 22
Fig. 21
Fig. 23
Plate 19
( 3 ) Mount plate 19 to cam holder complete. After mounting steel ball 5.0 to change lever, push the change lever
into cam holder complete. See Fig. 23.
Steel ball 5.0
Cam holder complete
Cam holder complete with
armature
< Note >
Apply MAKITA grease N No.1 to
steel ball 5.0 before mounting it.
