Standard Operating Procedure
Makita HM1810 Large Electric Breaker
Version 1 Issue date: 02/05/2017
Page 3 of 4
20 Goodshed Road Upper Hutt
Phone 04 528 4473
Do you have a
FIRST AID KIT?
Do you have a
FIRE EXTINGUISHER?
Can you make an
EMERGENCY CALL?
Section 6: Personal Protective Equipment (PPE)
Appropriate Personal Protective Equipment (PPE) is required for the operator and persons
assisting with loading and unloading.
Wear High Visability clothing if you are working with other people on the work site.
Breathing mask may be required. Tight fitting (and padded) gloves recommen
ded.
Section 7: Power Source and Lubricants
Power source
240V Electricity. Always use a residual-current circuit breaker (RCCB),
Ground Fault Circuit Interrupter, Transformer or other suitable electrical
Safety device.
Section 8: Operating Instructions
Always be sure that the tool is switched
off and unplugged before carrying out
any work on the tool.
Installing ‘Chisel’ or ‘Point’ bits
This tool accepts bits either with or without a collar on the chisel or point bit.
For bits with a collar:
Pivot the tool retainer back and slightly downward.
Insert the bit into the tool holder as far as it will go.
To securely retain the bit, return the tool retainer to
its original position. Always ensure that the bit is
securely retained by attempting to pull the bit out of
the tool holder.