P
4
/
19
R
epair
[3] DISASSEMBLY/ASSEMBLY
[3]-1. Controller, Switch
DISASSEMBLING
ASSEMBLING
M6x30
Hex socket
Head bolt (4pcs.)
1. Separate Handle by removing four M6x30 Hex
socket head bolts and two 4x18 Tapping screws.
2. Separate Controller section by removing two
M4x16 Hex socket head bolts.
M4x16 Hex socket
head bolt (2pcs.)
4x18 Tapping
screw (2pcs.)
4x18 Tapping screw
Handle
Strain relief
Controller section
Controller Section can be replaced as illustrated in Fig. 4.
Take the disassembling step in reverse.
Note: Do not forget to mount Pin 4 when replacing switch. (Fig. 5)
Controller
Switch
Controller
cover complete
3. Remove Strain relief.
Controller, Switch and Power supply cord can
be removed from Controller cover complete.
Fig. 4
Fig. 5
Power supply cord
Pin 4
Switch
[3]-2. Tool holder section (HM1307C, HM1317C)
DISASSEMBLING
ASSEMBLING
(1) Tool holder section can be disassembled from Barrel as illustrated in Fig. 6
(2) Tool holder section is can be disassembled as illustrated in Fig. 7.
Take the disassembling step in reverse.
Fig. 6
Fig. 7
1. Remove Handle section
and stand the machine.
2. Remove M8x35 Hex
socket head bolts with
Hex wrench 6 and Pipe.
Hex wrench 6
Pipe as
extension bar
1R306
1R258 (2pcs.)
Tool retainer
Tool retainer sleeve
Compression
spring 17
1R239 or
1R284
Tool holder
1. Attaching 1R239 or 1R284 to 1R306,
set the 1R306 to Arbor press.
2. Put Tool holder on 1R258.
3. Press the 1R239 or 1R284 with Arbor press.
