P
2
/
19
R
epair
CAUTION: Repair the machine in accordance with “Instruction manual” or “Safety instructions”.
[1] NECESSARY REPAIRING TOOLS
[2] LUBRICATIONS
Fig. 1
HM1307CB. HM1317CB
Code No.
Description
Use for
1R003
Retaining ring S pliers ST-2N
Removing Ring spring 55 from Cylinder
1R023
Pipe ring (for Arbor press)
Supporter when removing Cylinder section with 1R263
1R022/ 356 Bearing plate (for Arbor press) Pressing down Sleeve when removing Ring spring 55 from Cylinder
1R031
Bearing setting pipe 28-20.2
Assembling Helical gear 47 to Crank shaft
1R045
Gear extractor (large)
Removing Counter shaft
1R258
V block
Assembling Helical gear 47 to Crank shaft
1R212
Tip for Retaining ring pliers
Attachment for 1R003
1R217
Ring 22
Supporting Crank housing
1R228
1/4” Hex shank bit for M4
Unscrewing / Screwing M4 Hex socket head bolts
1R230
1/4” Hex shank bit for M6
Unscrewing / Screwing M6 Hex socket head bolts
1R231
1/4” Hex shank bit for M8
Unscrewing / Screwing M8 Hex socket head bolts
1R246
Round bar for arbor 18-100
Removing Crank shaft from Helical gear 47
1R252
Round Bar for arbor 30-100
Supporting Crank shaft when assembling Helical gear 47
1R263
Bearing extractor
Removing Cylinder section
1R269
Bearing extractor
Removing Ball bearing of Commutator side
1R348
Spring pin 8 remover
Removing Spring pin 8-40 from Tool retainer for HM1307CB, HM1317CB
1R239/ 284 Round bar for arbor 10-100 / 50 Removing Tool retainer from Tool holder for HM1307C, HM1317C
1R291
Retaining ring S and R pliers
Removing / Mounting Retaining ring S-8 from / to Counter shaft
1R306
Ring spring removing jig
Disassembling AVT mechanism
1R346
Center attachment for 1R045
Using with 1R045 to remove Counter shaft
1R347
Tool retainer pole removing tool Removing Tool retainer pole from Tool retainer
Item No.
Apply lubricants to the portions designated with triangles to protect parts and product from unusual abrasion.
(
Figs. 1
and 2.
)
Description
Sleeve 43
Tool retainer for
HM1307C and HM1317C
X ring 36
O ring 36
Inner wall for smooth action of Impact bolt
Drum portion for smooth turning in Bit change
Whole portion for smooth action of Impact bolt
Whole portion for smooth action of Sleeve
Portion to lubricate
Lubricant
Amount
a little
20
20
22
23
Tool holder
O ring 45
21
21
21
20
Whole portion for smooth action of Impact bolt
Tool holder
Impact bolt
Tool retainer
Retainer sleeve
Compression spring 17
Shank type: 28.6mm Hex
HM1307C. HM1317C
Shank type: 30mm Hex
22
23
Impact bolt
22
23
20
12
12
Tool holder section
Makita grease R
No.00