9 ENGLISH
Torque level
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
Machine screw
–
Wood
screw
Soft
wood
(e.g.
pine)
–
ø9 x 75
–
ø10 x 90
–
Hard
wood
(e.g.
lauan)
–
ø9 x 75
–
ø10 x 90
–
High speed
Torque level
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15 16 17 18 19 20 21
Machine screw
M4
M5
M6
–
Wood
screw
Soft
wood
(e.g.
pine)
ø3.5
x 22
ø4.1 x 38
–
ø5.1 x 50
–
ø6.2 x 63
–
Hard
wood
(e.g.
lauan)
–
ø3.5
x 22
ø4.1 x 38
–
ø5.1 x 50
–
ø6.2 x 63
–
Electronic function
The tool is equipped with the electronic functions for
easy operation.
•
Active Feedback sensing Technology
If the tool is swung at the predetermined accelera-
tion during operation, the motor is forcibly stopped
to reduce the burden on the wrist.
NOTICE:
Hold the tool firmly while operating.
NOTICE:
If any malfunction occurred with the
electronic function, the light blinks for 3 seconds,
and then, turns off. In that case, contact with Makita
Authorized or Factory Service Centers to repair.
NOTE:
This function does not work if the acceleration
does not reach the predetermined one when the tool
is swung.
NOTE:
If the tool is forcibly stopped, release the
switch trigger, and then pull the switch trigger to
restart the tool.
ASSEMBLY
CAUTION:
Always be sure that the tool is
switched off and the battery cartridge is removed
before carrying out any work on the tool.
Installing or removing driver bit/
drill bit
Optional accessory
1
2
3
►
1.
Sleeve
2.
Close
3.
Open
Turn the sleeve counterclockwise to open the chuck
jaws. Place the driver bit/drill bit in the chuck as far
as it will go. Turn the sleeve clockwise to tighten the
chuck. To remove the driver bit/drill bit, turn the sleeve
counterclockwise.
