background image

1

US

GB

GB

GB

GB

GB

GB

GB

GB

GB

GB

GB

GB

GB

GB

GB

FOREWORD

Thank you very much for purchasing a MAKITA GENERATOR.

This manual covers operation and maintenance of the MAKITA GENERATOR.

Please take a moment to familiarize yourself with the proper operation and maintenance procedures in order

to maximize the safe and efficient use of this product.

Keep this owner’s manual at hand, so that you can refer to it at any time.

Due to constant efforts to improve our products, certain procedures and specifications are subject to change

without notice.

When ordering spare parts, always give us the MODEL, PRODUCTION NUMBER (PROD No.) and 

SERIAL NUMBER (SER No.) of your Product.

Please fill in the following blanks after checking the production number on your product.

(Location of label is different depending on the product model.)

CONTENTS

1. SAFETY PRECAUTIONS  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
2. COMPONENTS  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 
3. CONTROLS AND INDICATORS  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
4. PRE-OPERATION CHECKS  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
5. OPERATING PROCEDURES  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7 
6. WATTAGE INFORMATION  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
7. SPARK ARRESTER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
8. MAINTENANCE SCHEDULE  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12 
9. "HOW-TO" MAINTENANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
10. PREPARATION FOR STORAGE  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
11. TROUBLESHOOTING  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
12. SPECIFICATIONS  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
13. WIRING DIAGRAM  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17

PROD No. SER No.
(Label)

Please refer to the illustrations on the back page of the front cover or back cover
for Fig. 

1

1

to 

6

6

indicated in the sentence.

NOTE

G1100(US)_GU1835  2004.2.6  1:04 PM  ページ1

Summary of Contents for G1100

























Reviews: