P
8
/ 1
0
R
epair
(7) Assemble Shelf group as drawn in
Fig. 11,
and check the condition of Impeller, in case of replacing the Engine to the new one.
Fig. 11
In case of replacing the Engine to the new one
M8 Hex nuts
1. Make sure that the fuel is removed completely from the Engine.
2. Switch off.
3. Pull Recoil starter in order to make sure that the rotating Impeller does not touch Volute.
In case of touching Volute, return to
Fig. 8
, and adjust by adding or reducing Washer(s).
Shelf group
1. Assemble Shelf group to the machine
with M8x35 Hex bolt, Flat washer
Wave washer and
M8 Hex nuts.
M8x35
Hex bolts
2. Tighten M8x35 Hex bolt and M8 Hex nut
to
13 N.m
fastening torque.
ASSEMBLING
[3] DISASSEMBLY/ASSEMBLY
[3] -1. Pump Section (cont.)
Flat gaskets
(Flat washers)
Wads
(Wave washers)
