11
Installing the protector (cutting tool guard)
WARNING:
Always use the tool with the approved combination of the safety equipments.
Otherwise contact with a cutting tool may cause serious
injury.
CAUTION:
Tighten the right and left bolts evenly so that the gap between the clamp and the protector is constant. Otherwise the protector may not function
as expected.
To meet the applicable safety provisions, only the tool / protector combinations as indicated in the table must be used.
Use of metal blade
Metal blade
Clamp washer, cup,
and nut are necessary
Protector
Use with barrier
Use with shoulder harness
Use of nylon cutting head
Nylon cutting head
Protector
1
3
2
4
For metal blade
Fix the protector type A (1) to the clamp (2) with two bolts M6 x 25 (3) with hex
wrench 5 (4).
Type A
Type A
Type B
