2
English
(Original instructions)
Table of Contents
Page
Symbols ............................................................................................2
Safety precautions ............................................................................3
Technical data.................................................................................12
Designation of parts........................................................................13
Chain saw’s safety function ............................................................14
Assembly ........................................................................................16
Before use ......................................................................................19
Starting and stopping engine ..........................................................21
Maintenance ...................................................................................23
Maintenance interval ......................................................................28
Trouble shooting .............................................................................29
SYMBOLS
Read Owner’s and Safety Manual and
follow the warning and safety precautions!
Chain brake
Particular care and caution!
Fuel and oil mixture
Forbidden!
Chain oil fill/oil pump
Wear eye protection.
Saw chain oil adjustment screw
Wear ear protection.
Primer pump
Wear protective helmet, eye and ear
protection!
Chain direction
Wear protective gloves!
First aid
No smoking!
Do not touch hot surfaces!
No open fire!
Maximum Computed Kickback Angle
(CKA)* without using the chain brake
when using the recommended bar and
chain combinations (In this example the
CKA is 45°).
Stop engine!
Maximum Computed Kickback Angle
(CKA)* with using the chain brake when
using the recommended bar and chain
combinations (In this example the CKA
is 40°).
Start engine
Contact of the guide bar tip with any
object should be avoided!
Tip contact may cause the guide bar to
move suddenly upward and backward,
which may cause serious injury!
Combination switch, Choke ON/STOP
Always use two hands when operating
the chain saw!
Caution, kickback!
Reduced Kickback Bar and Chain
combination that has been evaluated
with the power head to achieve kickback
protection (according to ANSI and CSA
standards).
* The Computed Kickback Angle is a calculated value from energies measured on a test bench. It is not the angle of the guide bar moved
upward in case of a KICKBACK.
You will notice the following symbols on the saw and in the Owner’s and Safety Manual: