![background image](http://html.mh-extra.com/html/makita/dwt310/dwt310_instruction-manual_230563009.webp)
9 ENGLISH
7.
Pull the eject lever to eject the bolt tip from the
tool. Catch the sheared bolt tips to prevent them from
f alling.
Fig.16:
1.
Bolt tip
NOTICE:
Washer and nut have head and tail.
Head has identification mark for nut and chamfer
for w asher. When placing them, be careful not to
place in reverse.
Fig.17:
1.
Identification mark
2.
Nut
3.
Bolt
4.
C h amf ered
5.
W ash er
NOTICE:
Replace nut, bolt and w asher all
together at one time w hen these rotate together,
nut rotates excessively or a bolt protrude from
nut surface too much or less.
NOTICE:
Do not reuse used nut, bolt and w asher.
The range for the remaining length of bolts after cutting
off the bolt tips are determined by bolt size. Refer to the
table below and choose shear bolts according to the
thickness of workpiece to be fastened.
Bolt size
Maximum remain-
ing length
Minimum remain-
ing length
M1 6
20 mm
4 .5 mm
M20
1 5 mm
5 .5 mm
M22
1 4 mm
7 mm
Fig.18:
1.
R emaining length
NOTICE:
Use bolts w ith the remaining length
w ithin the range show n in the table above as bolts
w ith different size have different maximum and
minimum remaining length.
NOTICE:
Be careful not to use bolts beyond
the specified range which may cause the tool
malfunction.
MAINTENANCE
CAUTION:
Alw ays be sure that the tool is
sw itched off and the battery cartridge is removed
before attempting to perform inspection or
maintenance.
NOTICE:
Never use gasoline, benzine, thinner,
alcohol or the like. Discoloration, deformation or
cracks may result.
To maintain product SAFETY and RELIABILITY,
repairs, any other maintenance or adjustment should
be performed by Makita Authorized or Factory Service
Centers, always using Makita replacement parts.
Battery guard
WARNING:
Do not remove the battery
guard. Do not use the tool w ith the battery guard
removed or damaged.
Direct impact to the battery
cartridge may cause battery malfunction and result
in injury and/or fire. If the battery guard is deformed
or damaged, contact your authorized service center
f or repairs.
CAUTION:
Do not attach a strap to the battery
guard for hanging the tool.
CAUTION:
Do not attach the shoulder belt to
the battery guard.
Fig.19:
1.
Battery guard
2.
Battery guard holder
OPTIONAL
ACCESSORIES
CAUTION:
These accessories or attachments
are recommended for use w ith your Makita tool
specified in this manual.
The use of any other
ac c essories or attac h ments migh t present a risk of
injury to persons. Only use accessory or attachment
f or its stated purpose.
If you need any assistance for more details regard
-
ing these accessories, ask your local Makita Service
C enter.
Bolt size
Sleeve
Length
M1 6
O uter sleev e
35 mm
I nner sleev e
36 mm
M20
O uter sleev e
37 mm
I nner sleev e
38 mm
M22
O uter sleev e
39 mm
I nner sleev e
39 mm
M22
O uter sleev e
8 5 mm
I nner sleev e
8 5 mm
5/8
O uter sleev e
35 mm
I nner sleev e
36 mm
/
O uter sleev e
37 mm
I nner sleev e
38 mm
/
O uter sleev e
8 3 mm
I nner sleev e
8 4 mm
Makita genuine battery and charger
NOTE:
Some items in the list may be included in the
tool package as standard accessories. They may
differ from country to country.
Summary of Contents for DWT310
