3 ENGLISH
Model DUR368L
Cutting tool
Sound pressure level (LpA)
dB(A)
Sound power level (LWA)
dB(A)
LpA dB(A)
Uncertainty (K)
dB(A)
LWA dB(A)
Uncertainty (K)
dB(A)
4-tooth blade
74.7
1.0
89.2
1.6
Nylon cutting head
76.4
1.6
89
1.0
Plastic blade
75.1
0.3
86
0.4
•
Even if the sound pressure level listed above is 80 dB (A) or less, the level under working may exceed 80 dB
(A). Wear ear protection.
NOTE:
The declared noise emission value(s) has been measured in accordance with a standard test method and
may be used for comparing one tool with another.
NOTE:
The declared noise emission value(s) may also be used in a preliminary assessment of exposure.
WARNING:
Wear ear protection.
WARNING:
The noise emission during actual use of the power tool can differ from the declared val-
ue(s) depending on the ways in which the tool is used especially what kind of workpiece is processed.
WARNING:
Be sure to identify safety measures to protect the operator that are based on an estimation
of exposure in the actual conditions of use (taking account of all parts of the operating cycle such as the
times when the tool is switched off and when it is running idle in addition to the trigger time).
Vibration
Applicable standard : ISO22867
Model DUR368A
Cutting tool
Left hand
Right hand
a
h,W
(m/s
2
)
Uncertainty K
(m/s
2
)
a
h,W
(m/s
2
)
Uncertainty K
(m/s
2
)
4-tooth blade
2.5
1.5
2.5
1.5
Nylon cutting head
2.5
1.5
2.5
1.5
Plastic blade
2.5
1.5
2.5
1.5
Model DUR368L
Cutting tool
Left hand
Right hand
a
h,W
(m/s
2
)
Uncertainty K
(m/s
2
)
a
h,W
(m/s
2
)
Uncertainty K
(m/s
2
)
4-tooth blade
2.5
1.5
2.5
1.5
Nylon cutting head
2.5
1.5
2.5
1.5
Plastic blade
2.5
1.5
2.5
1.5
NOTE:
The declared vibration total value(s) has been measured in accordance with a standard test method and
may be used for comparing one tool with another.
NOTE:
The declared vibration total value(s) may also be used in a preliminary assessment of exposure.
WARNING:
The vibration emission during actual use of the power tool can differ from the declared
value(s) depending on the ways in which the tool is used especially what kind of workpiece is processed.
WARNING:
Be sure to identify safety measures to protect the operator that are based on an estimation
of exposure in the actual conditions of use (taking account of all parts of the operating cycle such as the
times when the tool is switched off and when it is running idle in addition to the trigger time).
Summary of Contents for DUR368AZ
