15
ENGLISH
4.
Set the angle of a file to 35°, and grind the upper
blade from 2 directions with the file.
1
2
Fig.33
►
(1)
File
(2)
35°
CAUTION:
Before grinding the shear blades,
make sure that the tool is switched off and the
battery cartridge is removed from the tool.
5.
Place the tool upside down, and then remove the
burrs from the shear blades with the dressing stone.
1
Fig.34
►
1.
Dressing stone
6.
Set the angle of the file to 35°, and grind the lower
blade from 2 directions with the file.
7.
Return the tool to normal position, and then
remove the burrs from the shear blades with the dress-
ing stone.
Grease lubrication
Interval of lubrication:
Every 50 operating hours
1.
Remove the bolt from the hole for lubrication.
1
Fig.35
►
1.
Bolt
2.
Remove the cap from the grease vessel. Align the
outlet of the grease vessel with the hole on the cover,
and then turn the grease vessel to attach the outlet of
the grease vessel into the hole.
2
1
Fig.36
►
1.
Grease vessel
2.
Hole
3.
Apply the grease to the tool (Approximately 3 g as
a guide).
4.
Remove the grease vessel.
5.
Tighten the bolt.
