6 / 32
Fig. 5
2
Assemble Sprocket cover ass’y [2] to Housing set
[1] and tighten Flange nut complete [3] lightly.
Fig. 6
3
Adjust Drive gear [2] until Saw chain [3] fit tightly
to Guide bar [1] while lifting Guide bar [1].
Fig. 7
4
Release the brake and use a screwdriver or the like
to check that the tension of Saw chain [1] is not
loose. If Saw chain does not fit securely into
Sprocket, it may loosen. And so, do tension
adjustment again.
5
Assemble Guide bar case [3] in place and tighten
Flange nut complete [2].
Note
Tighten Flange nut [2] while pushing the top of Guide
bar case [3] to the workbench and lifting up the
machine body.
[1]
[3]
[2]
[3]
[1]
[3]
[1]
[2]
[2]
[3]
[1]