12 / 32
Fig. 20
7
Assemble the following parts to Housing set [1].
Grommet [2]
Adjust screw [3]
Tension slide [4]
Straight bevel gears 14 [5] (2 pcs)
Drive Gear [6]
Guide plate L [7]
M5x12 H. L. socket head bolt [8]
Spike bumper [9]
Chain catcher [10]
5x20 Tapping screws [11] (2 pcs)
Note
Assemble Chain catcher [10] all the way to the dotted
line shape of Housing set [1].
Apply the specified adhesive to M5x12 H. L. socket
head bolt [8].
Fig. 21
8
Assemble the following parts with Front hand
guard [1] is lifted and the brake is released.
Brake drum complete [3]
O ring 10 [4]
Sprocket 6 [5]/ Sprocket 9 [6]
Stop ring E7 [7]
Tips
There are two types of Sprockets and they have
different shapes on their front and back. However,
each orientation does not matter.
Apply the specified grease to the two flat sides of
Sprocket.
When it is difficult to assemble Stop ring E-7 [7],
Rotor is moved to the bottom with the clearance on
the axial direction, so move out the shaft by tapping
Housing set with a plastic hammer.
[1]
[2]
[7]
[5]
[4]
[3]
[3]
[5]
[7]
[7]
[5]
[6]
[1]
[2]
[6]
[4]
[9]
[7]
[8]
[4]
[5]
[6]
[3]
[11]
[10]