P 2/ 6
Fig. 1
R
epair
It is not required to lubricate the machine because of no gear mechanism to be lubricated.
[3] DISASSEMBLY/ASSEMBLY
[3] -1. Fan 95, Armature
[1] NECESSARY REPAIRING TOOLS
CAUTION: Repair the machine in accordance with “Instruction manual” or “Safety instructions”.
Code No.
---
Description
Use for
Socket bit 8-55 (width across flats: 8mm)
Disassembling/ Assembling M5-8 Hex nut for Fan 95
[2] LUBRICATION
DISASSEMBLING
(1) Disassemble Motor section from Housing (L) as drawn in
Fig. 1
.
Holder cap cover
2. Remove Holder cap covers, Holder caps and Carbon Brushes
from the both side of the machine.
3. Remove Housing (R) by unscrewing
fourteen 4x18 tapping screws.
4. Separate Armature section together
with Yoke unit from Endbell complete.
1. Remove Long nozzle
Holder cap
Carbon brush
Long nozzle
Endbell
complete
Yoke unit
Armature
