background image

10 ENGLISH

Speed adjusting dial

1

►    

1.

 Speed adjusting dial

The speed can be changed by turning the speed adjusting dial 

to a given number setting from 1 to 3. Higher speed is obtained 

when the dial is turned in the direction of number 3. And lower 

speed is obtained when it is turned in the direction of number 1.

Refer to the table for the relationship between the num-

ber settings on the dial and the speed.

Number

Speed

3

High

2

Medium

1

Low

NOTICE:

 

When turning the dial, be sure to com-

pletely release the switch trigger. Otherwise, the 

machine may be damaged.

OPERATION

CAUTION:

 

Do not place the machine on the 

ground while it is switched on.

 Sand or dust may 

enter from suction inlet and cause a malfunction or 

personal injury.

Blower operation

CAUTION:

 

When performing the blower 

operation, be sure to remove the dust bag from 

the machine, and attach the nozzle in place for 

blowing.

Hold the machine firmly with a hand and perform the 

blowing operation by moving it around slowly. When 

blowing around building, big stone or vehicle, direct the 

nozzle away from them. When performing an operation 

in a corner, start from the corner and then move to wide 

area.

For DUB185

For DUB186

Vacuuming operation

CAUTION:

 

When performing the vacuuming 

operation, be sure to attach the dust bag and 

nozzle in place to the machine.

CAUTION:

 

Check the dust bag frequently for 

wear or deterioration.

CAUTION:

 

Be sure to fasten the fastener of 

the dust bag before operating the machine.

CAUTION:

 

Always switch off the machine 

before opening or fastening the fastener of the 

dust bag.

NOTICE:

 

When performing the vacuuming oper-

ation, do not use the garden nozzle.

 The materials 

sucked may be clogged, and cause a malfunction of 

the machine.

NOTICE:

 

Do not allow wet materials, such as 

wet leaves, and foreign materials, such as large 

wood chips, metals, glass, pebbles, etc., to be 

sucked into the machine.

 Otherwise, a malfunction 

may occur.

NOTICE:

 

Empty the dust bag before it becomes 

full.

 Otherwise, a malfunction may occur.

Summary of Contents for DUB185F001













Reviews: