[3] DISASSEMBLY/ASSEMBLY
[3] -4. Mounting Hammer case section, Motor section and Switch to Housing (L)
1. Assemble F/R change lever to Switch by fitting the prong of
F/R change lever to the projection of Switch.
2. Set Switch to Housing set L straight and carefully so that the seal
of Switch does not move from the proper position.
ASSEMBLING
(1) Assemble Stator unit and Hammer case complete to Housing set L as drawn in
Fig. 17
.
(2) Assemble Switch, F/R change lever and Switch plate complete as drawn in
Fig. 18
.
Fig. 17
Fig. 18
Fit two depressions of Stator unit to two projections of Housing set L, and fit
the projection of Hammer case complete to the depression of Housing set L.
Two depressions of Stator unit
Two projections of Housing set L
Projection of Hammer case complete
Depression of Housing set L
Face the stopper of Hammer case complete toward Switch side.
Prong of
F/R change
lever
Switch plate
complete
Face the round mark side of
Switch plate complete to
Housing set L.
Housing set L
Projection
of Switch
round mark
R
epair
P 9/ 14
Stopper of Hammer case complete
The other projection of Hammer case complete and
the other depressions of Stator complete should be
fit to Housing set R.
