4 / 9
4
REPAIR
4-1
Battery
4-1-1
Disassembling
1
Remove the battery.
4-2
Motor and Pump section
4-2-1
Disassembling
Fig.1
1
Remove Swim ring adapter [1] and Ball adapter [2]
from Fixed bracket.
Fig.2
2
Remove Screws 3x14 [1] (10 pcs), then remove
Housing.
3
Remove Mats [2] (2 pcs).
Fig.3
4
Remove Lead wires of Motor assembly [1] to
release the lock by pinching the claw on the
connector of PCB [2].
5
Loosen the screw on Clamp [3] with a slotted
screwdriver [4], then remove Tube on the side of
Pressure sensor [5] with 1R311, and then pull out
Tube. Remove Fixed bracket [6].
6
Remove Motor assembly [1] from Housing.
Note
Note that Rubber (Cylinder) may come off (be left on
Housing side) when Motor assembly [1] is removed
from Housing.
[3]
[5]
[6]
[2]
[1]
[4]
[1]
[2]
[1]
[2]
