October 2015
4.4.12.
STOPPER PIN
4.4.12.1.
DISASSEMBLING
1. Lift Blade case section to the highest raised position and
push Knob 20 (152) to hold the position of Blade case
section.
2. By lowering Blade case section, it can be fixed thanks to
Stopper pin (154).
3. Turn Knob 20 (152) counterclockwise to loosen a little.
Note:
Do not remove Knob 20 (152) completely from
Stopper pin (154). Otherwise, you cannot pull
Stopper pin (154) in the next step.
Figure 72
4. Remove Blade case section.
(See
5. Remove Knob 20 (152) and pull out Stopper pin (154) in
the direction indicated by the arrow.
Figure 73
4.4.12.2.
ASSEMBLING
Assemble by reversing the disassembly procedure.
Apply Makita grease FA. No.2 to the specified position. (See
(152)
(152)
(154)
37 / 47