October 2015
4.4.
DISASSEMBLY/ASSEMBLY
4.4.1.
WARNING
Remove Battery and Blade from the machine.
4.4.2.
BLADE CASE COMPLETE
4.4.2.1.
DISASSEMBLING
1. Remove Safety cover section and Dust nozzle (41).
2. For setting the machine at the highest raised position,
push Stopper pin (154) into Front arm complete (145).
Figure 10
3. Remove M6x20 Hex socket head bolt (30), Flat washer 6
(31) and Ring 6 (32), then remove Link plate complete
(33) from Front arm complete (145).
Figure 11
4. Loosen M6x10 H.S. set screw (150), (151).
Note:
It is not necessary to remove the screws from Blade
case complete (46).
Figure 12
(145)
(145)
(33)
(30), (31), (32)
(150)
(151)
(46)
(154)
15 / 47