October 2015
4.4.7.2.
ASSEMBLING
Assemble by reversing the disassembly procedure.
Be careful to check the points mentioned in
and
1. Be sure that Lock lever (86) moves smoothly.
2. In case it is hard to operate Safety lock mechanism,
adjust the position of Rod holder (81) by sliding it
parallel to Blade case.
Figure 57
3. Loosen two M4x10 Pan head screws (93) and slide Sub
lever (94) up or down to give a 1mm to 2mm clearance
from Safety cover (68) as drawn in the figure on the left.
And tighten the screws.
Figure 58
(81)
(46)
(86)
1 to 2
㎜
(68)
(94)
(93)
30 / 47