October 2015
4.4.3.
ROTOR
4.4.3.1.
DISASSEMBLING
1. Remove six M5x45 Pan head screws (3), then remove
Handle section and Motor housing section.
Figure 26
2. Remove Ball bearing 629DDW (28) with 1R269.
Figure 27
3. Clamp the flats of Rotor ass’y (25) with Vise and two
1R041 and pull off Motor housing section.
Note:
Do not cramp Gear section.
Figure 28
4. Remove Ball bearing 607DDW (22) with 1R269.
Figure 29
(28)
1R269
(22)
1R269
Handle section
Motor housing section
1R041
1R041
(25)
Motor housing section
(3)
20 / 47