13 ENGLISH
2.
Loosen the clamping nuts and pivot the upper
handle back while expanding the both sides.
1
2
►
1.
Clamping nut
2.
Upper handle
3.
Store the grass basket between the handle and
the mower body.
1
►
1.
Grass basket
NOTE:
When putting the mower in the upright posi-
tion, do not hold the handle but use the front grip of
the mower.
Removing or installing the mower
blade
WARNING:
Always remove the lock key and
battery cartridge when removing or installing the
blade. Failure to remove the lock key and battery
cartridge may cause a serious injury.
WARNING:
The blade coasts for a few sec-
onds after releasing the switch. Do not start any
operation until the blade comes to a complete
stop.
WARNING:
Always wear gloves when han-
dling the blade.
Removing the mower blade
For DLM382
1.
Put the mower on its side so that the mowing
height adjusting lever comes to the upper side.
2.
To lock the blade rotation, insert a screwdriver or a
similar tool into a hole on the mower body.
3.
Turn the bolt counterclockwise with the wrench.
1
2
3
►
1.
Mower blade
2.
Screwdriver
3.
Wrench
4.
Remove the bolt and blade in order.
3
1
2
►
1.
Blade support
2.
Mower blade
3.
Bolt
For DLM432
1.
Put the mower on its side so that the mowing
height adjusting lever comes to the upper side.
2.
To lock the blade rotation, insert a screwdriver or a
similar tool into a hole on the mower body.
3.
Turn the bolt counterclockwise with the wrench.
1
2
3
►
1.
Mower blade
2.
Screwdriver
3.
Wrench
