Makita DLM432PG2 Instruction Manual Download Page 12

12 ENGLISH

Mowing a long-grass lawn

Do not try to cut long grass all in one go. Instead, mow 

the lawn in some steps. Leave a day or two between 

mows until the lawn becomes evenly short.

NOTE:

 Mowing long grass to a short length all in one 

go may cause the grass to die. The cut grass may 

also block up  inside of the mower body.

Emptying the grass basket

WARNING:

 

To reduce a risk of accident, regu-

larly check the grass basket for any damage or weak-

ened strength. Replace the grass basket if necessary.

1.

 

Release the switch lever.

2.

  Remove the lock key.

3.

 

Open the rear cover and take out the grass basket 

by holding the handle.

1

2

►    

1.

 Rear cover 

2.

 Handle

4.

  Empty the grass basket.

MAINTENANCE

WARNING:

 

Always be sure that the lock 

key and battery cartridge are removed from the 

mower before storing or carrying the mower or 

attempting to perform inspection or maintenance.

WARNING:

 

Always remove the lock key when 

the mower is not in use. Store the lock key in a 

safe place out of reach of children.

WARNING:

 

Wear gloves when performing 

inspection or maintenance.

WARNING:

 

Always wear the safety goggles or 

safety glasses with side shields when performing 

inspection or maintenance.

NOTICE:

 

Never use gasoline, benzine, thinner, 

alcohol or the like. Discoloration, deformation or 

cracks may result.

To maintain product SAFETY and RELIABILITY, 

repairs, any other maintenance or adjustment should 

be performed by Makita Authorized or Factory Service 

Centers, always using Makita replacement parts.

Maintenance

1.

  Remove the lock key. Store it in a safe place out of 

the reach of children.

2.

  Clean the mower using only a wet cloth. Do not 

spray or pour water on the mower when cleaning.

3.

 

Put the mower on its side and clean grass clip-

pings accumulated on the underside of mower deck.

4.

 

Check all nuts, bolts, knobs, screws, fasteners etc. 

for tightness.

5.

 

Inspect moving parts for damage, breakage, and 

wear. Damaged or missing parts should be repaired or 

replaced.

Storage

WARNING:

 

When carrying or storing the 

mower, do not hold the folded handles but the 

front grip of the mower. 

Holding the folded handles 

may cause a serious injury or damage to the mower.

Before storing the mower, remove the battery cartridge 

and lock key.

Store mower indoors in a cool, dry and locked place. 

Don't store the mower and charger in locations where 

the temperature may reach or exceed 40 °C.

1

2

►    

1.

 Front grip 

2.

 Rear grip

1.

 

Loosen the clamping screws and expand the 

lower handle to both sides. Move down the handle for-

ward. At this time, keep a firm grip on the lower handle 

so that the handle does not fall down to the far side from 

the mower body.

1

2

►    

1.

 Clamping screw 

2.

 Lower handle

Summary of Contents for DLM432PG2

















Reviews: