12 ENGLISH
Switch action
►
Fig.4:
1.
Switch trigger
CAUTION:
•
Before inserting the battery cartridge into the
tool, always check to see that the switch trigger
actuates properly and returns to the "OFF"
position when released.
To start the tool, simply pull the switch trigger. Release
the switch trigger to stop.
Lighting the lamp
For Model DCL180F only
CAUTION:
•
Never look into the light directly. Direct light
causes damage to your eyes.
►
Fig.5:
1.
Lamp
Pull the switch trigger to light up the lamp. Release the
switch trigger to turn off.
Indicating the remaining battery
capacity
Only for battery cartridges with the indicator
►
Fig.6:
1.
Indicator lamps
2.
Check button
Press the check button on the battery cartridge to indi-
cate the remaining battery capacity. The indicator lamps
light up for a few seconds.
Indicator lamps
Remaining
capacity
Lighted
Off
Blinking
75% to 100%
50% to 75%
25% to 50%
0% to 25%
Charge the
battery.
The battery
may have
malfunctioned.
NOTE:
Depending on the conditions of use and the
ambient temperature, the indication may differ slightly
from the actual capacity.
ASSEMBLY
CAUTION:
•
Always be sure that the tool is switched off and
the battery cartridge is removed before carrying
out any work on the tool.
Type of filter
Normal filter
►
Fig.7:
1.
Capsule
2.
Prefilter
3.
Filter
High performance filter
►
Fig.8:
1.
Capsule
2.
High performance filter
Disposing of dust
CAUTION:
•
Empty the cleaner before it becomes too full, or
the suction force weakens.
•
Be sure to empty out the dust inside the cleaner
itself. Failure to do so may cause the filter to be
clogged or the motor to be damaged.
Disposing of dust for normal filter
In order to drop dust sticking on the filter in the capsule,
tap the capsule 4 or 5 times with your hand.
Now point suction inlet downwards, turn capsule in direction of
arrow in diagram, and disconnect capsule slowly and straight.
►
Fig.9:
1.
Capsule
2.
Suction inlet
NOTE:
•
Dust may spill out when capsule is opened, so
be sure to set a garbage bag beneath capsule.
Remove accumulated dust from inside of capsule and
off of prefilter.
►
Fig.10:
1.
Prefilter
2.
Capsule
Twist prefilter in direction of arrow to unfasten securing
lip from cleaner unit and then pull off prefilter.
►
Fig.11:
1.
Prefilter
2.
Securing lip
Clean out fine dust from prefilter. Next, remove filter,
and lightly tap to dislodge dust.
►
Fig.12:
1.
Prefilter
2.
Filter
Disposing of dust for high performance filter
In order to drop dust sticking on the filter in the capsule,
tap the capsule 4 or 5 times with your hand.
Now point suction inlet downwards, turn capsule in
direction of arrow in diagram, and disconnect capsule
slowly and straight.
►
Fig.13:
1.
Capsule
2.
Suction inlet
NOTE:
•
Dust may spill out when capsule is opened, so
be sure to set a garbage bag beneath capsule.
Remove accumulated dust from inside of capsule and
off of high performance filter.
►
Fig.14:
1.
Capsule
2.
High performance filter
Summary of Contents for DCL180F
