R
epair
P 7 / 8
(4) Replacing fuse for 220 - 240V
(See Fig. 13)
1. Remove damaged fuse from the receptacle, and replace the damaged one with new fuse.
(4A) Replacing fuse for 120 (See Fig. 13A.)
1. Remove damaged fuse from terminal with soldering iron.
2. Connect the wire of fuse to the terminal by soldering.
< Note > Be careful not to overheat the fuse with soldering iron. Otherwise the wire
of fuse may be cut with the heat of soldering iron.
Fuse for 120V
Fig. 13
Fig. 13A
Receptacles
Fuse for 220 - 240V
Terminal
Cap 13
Tapping
screw 4 x 20
Cap 13
Tapping
screw 4 x 20
<9> When finish of repair, fasten circuit board complete to charger case
with 4 tapping screws 4 x 20.
And, do not forget to attach 4 caps 13.
Fig. 14
