Equipment characteristics:
Wet Diamond Core Drill DBM 230
Rated Voltage:
230 V ~
Rated Power Input:
2500 W
Rated Current:
13,5 A
Frequency::
40-60 Hz
max. Drilling Diameter:
230 mm
Holding fixture:
1¼" UNC
Insulation Class:
I
IP Rating:
IP 20
Weight according to EPTA Procedure 01/2003: 11,3 kg
Interference Suppression:
EN 55014 und EN 61000
Gear
No-Load
Speed
Load Speed max.
Drilling Diameter
390 min
-1
270 min
-1
230 mm
1040 min
-1
700 min
-1
100 mm
1700 min
-1
1250 min
-1
60 mm
Prescribed use
The Wet Diamond Core Drill DBM 230 shall only be operated by trained
personnel!
The DBM 230 in connection with wet core drill bits is designed for drilling in
concrete, stone and masonry for wet cutting only.
The tool may only be used in conjunction with a suitable diamond drilling
stand (P-54190).
Safety precautions
Important directions and safety precautions are represented by symbols on the
tool.
Read these instructions carefully and completely and adhere
to them strictly in order to ensure safe working conditions.
In addition, the general safety regulations in the annexed
brochure must be observed. Before using the tool for the
first time, ask for a practical demonstration.
