Makita CV100D, Instruction Manual

Page: 4 / 168

4
battery pack may create a risk of fire when used with
another battery pack.
• Use the vest only with specifically designated battery
packs. Use of any other battery packs may create a risk
of injury and fire.
• Before using battery cartridge, read all instructions and
cautionary markings on (1) battery charger, (2) battery,
and (3) product using battery.
• Do not disassemble battery cartridge.
• If operating time has become excessively shorter, stop
operating immediately. It may result in a risk of
overheating, possible burns and even an explosion.
• Under abusive conditions, liquid may be ejected from
the battery; avoid contact. If electrolyte gets into your
eyes, rinse them out with clear water and seek medical
attention right away. It may result in loss of your
eyesight.
• Do not short the battery cartridge:
1. Do not touch the terminals with any conductive
material.
2. Avoid storing battery cartridge in a container with
other metal objects such as nails, coins, etc.
3. Do not expose battery cartridge to water or rain.
A battery short can cause a large current flow,
overheating, possible burns and even a breakdown.
• Do not store the vest, battery holder and battery
cartridge in locations where the temperature may reach
or exceed 50°C (122°F).
• Do not incinerate the battery cartridge even if it is
severely damaged or is completely worn out. The
battery cartridge can explode in a fire.
• Be careful not to drop or strike battery.
• Do not use a damaged battery.
• Follow your local regulations relating to disposal of
battery.
Tips for maintaining maximum battery life
• Never recharge a fully charged battery cartridge.
Overcharging shortens the battery service life.
• Charge the battery cartridge with room temperature at
10°C - 40°C (50°F - 104°F).
• Let a hot battery cartridge cool down before charging it.
• Charge the battery cartridge if you do not use it for a
long period (more than six months).
• For an optimum life-time, the battery cartridge have to
be fully charged, after use.
SAVE THESE INSTRUCTIONS.
(See the last part of this instruction manual for all the illustrations.)
• Due to our continuing program of research and development, the specifications herein are subject to change without
notice.
• Specifications and battery cartridge may differ from country to country.
• Operating time may differ depending on battery type and usage condition.
DESIGNATION OF PARTS (Fig. 1)
1. Power button
2. Battery holder pocket (Backside)
3. Power cable (Inside the battery
holder pocket) 4. Battery holder
SPECIFICATIONS
Model CV100D DCV200
Temperature adjustment steps 3
Material
Shell and Lining: 100% Nylon
Side: 90% Polyester
10% Spandex
Arm hole circumference: 100% Polyester
Fill: 100% Polyester
USB power supply port – DC 5V, 2.1A
Operating time (h) With battery BL1013 With battery BL1450 With battery BL1850
Low APPROX. 4.5 APPROX. 18 APPROX. 28
Medium APPROX. 2.5 APPROX. 10 APPROX. 16
High APPROX. 1.5 APPROX. 5.5 APPROX. 8
Rated voltage (V) 10.8 14.4 18
Battery cartridge BL1013
BL1415, BL1415N,
BL1430, BL1430B,
BL1440, BL1450,
BL1460B
BL1815, BL1815N,
BL1820, BL1820B,
BL1830, BL1830B,
BL1840, BL1840B,
BL1850, BL1850B,
BL1860B