15 ENGLISH
Troubleshooting
Before asking for repairs, check the following points.
Symptom
Area to be investigated
Fixing method
Weak suction power
Is the capsule full of dust?
Empty the capsule of dust.
Is the filter clogged?
Clean or wash the filter.
Is the battery cartridge discharged?
Charge the battery cartridge.
Not working
Is the battery cartridge discharged?
Charge the battery cartridge.
Noise and vibration
Is the filter clogged?
Clean or wash the filter.
Is the nozzle, pipe or suction inlet of the
appliance is clogged?
Remove the clogged objects in the nozzle,
pipe or suction inlet of the appliance.
Is the nozzle/pipe inlet blocked?
Do not block the nozzle/pipe inlet.
CAUTION:
Do not attempt to repair the cleaner by yourself.
OPTIONAL
ACCESSORIES
CAUTION:
These accessories or attachments
are recommended for use with your Makita tool
specified in this manual.
The use of any other
accessories or attachments might present a risk of
injury to persons. Only use accessory or attachment
for its stated purpose.
If you need any assistance for more details regard-
ing these accessories, ask your local Makita Service
Center.
•
Extension wand (Straight pipe)
• Nozzle
•
Nozzle for carpet
•
Shelf brush
•
Corner nozzle
•
Round brush
•
Flexible hose
• Filter
•
Prefilter
•
High performance filter
•
HEPA filter
•
Free nozzle
•
Seat nozzle
•
Crevice nozzle
•
Wall mount for cordless cleaner
•
Cyclone attachment
•
Tool bag
•
Makita genuine battery and charger
NOTE:
Some items in the list may be included in the
tool package as standard accessories. They may
differ from country to country.
Cyclone attachment
►
Fig.36:
1.
Release button
2.
Hook
3.
Straight pipe
4.
Cyclone attachment
5.
Suction inlet
About the cyclone attachment
Using the cleaner with the cyclone attachment installed
reduces the amount of dust that enters the capsule,
which helps to prevent the suction force from weaken-
ing. In addition, cleaning after use is also simple.
CAUTION:
Always be sure that the tool is
switched off and the battery cartridge is removed
before carrying out any work on the tool.
If the
battery cartridge is left inserted, the cleaner may start
unexpectedly and result in injury.
CAUTION:
Clean the mesh filter of the
cyclone attachment and the filters of the cleaner
unit when they become clogged.
Continued use in
the clogged condition may result in heating or smoke.
NOTICE:
When the cyclone attachment is
attached, do not use the cleaner in a horizontal
or upward facing position.
Doing so may cause the
mesh filter to become clogged.
NOTICE:
Always use the cleaner with the filters
installed, even when using the cyclone attach-
ment.
Using the cleaner without the filters installed
may result in a motor malfunction.
NOTE:
Check that the cyclone attachment, cleaner,
and straight pipe are locked properly before use.
NOTE:
Empty the dust case of the cyclone attach-
ment and the capsule of the cleaner when dust has
accumulated. Continued use will result in weakened
suction force.
NOTE:
You can also use the cyclone attachment with-
out lock function.
NOTE:
To install or remove the cyclone attachment,
refer to the section "Installing or removing the cleaner
attachment".
Summary of Contents for CL001G
Page 4: ...2 1 Fig 17 1 2 Fig 18 1 2 Fig 19 3 2 1 Fig 20 1 2 Fig 21 Fig 22 1 Fig 23 4 ...
Page 5: ...3 2 1 Fig 24 2 1 Fig 25 1 2 Fig 26 2 3 1 Fig 27 Fig 28 1 Fig 29 Fig 30 Fig 31 5 ...
Page 6: ...Fig 32 Fig 33 2 1 Fig 34 1 Fig 35 3 4 1 2 5 Fig 36 2 3 1 4 Fig 37 6 ...
Page 7: ...2 1 Fig 38 2 1 Fig 39 1 2 Fig 40 1 2 3 Fig 41 7 ...