
P
9
/ 1
1
Fig.D-3
Fig.D-5
Fig.D-4
W
iring diagram
Boss
Rib
Lead wire holder
Lead wires of LED circuit before putting Switch into Housing set (L)
Lead wires of Brush holder complete to Switch
Specifications without Line filter
Specifications with Line filter
Lead wire holder
Do not cross the lead wires in this range.
Fix Lead wires into Lead wire
holders or with Rib and Boss.
Do not slack Lead wires around here. Never pinch them between Ribs/ Bosses
of Housing set (L and R).
The space between Rib and Boss is allowed to use as Lead wire holder.
LED
20º
Assemble Lead wire (red)
with M1 terminal to Switch
vertically.
Assemble Lead wire (black)
with M2 terminal to Switch
at approx. 20
° left
from
the vertical line.
Assemble each Lead wire
connecting terminal to
Switch at approx. 20° left
from the vertical line.
Fully bend M2 terminal
of Lead wire (black)
to reserve the space
for Line filter.
M1 Terminal
M1 Terminal
M2 Terminal
M2 Terminal
20
°
9mm
9mm
Brush holder end
Pigtail of Carbon brush
Pigtails on Brush holder complete
Pigtails of Carbon brushes
have to be put in the areas
designated in gray color
without being projected
when Brush holder complete
is set in place.