P 1
0
/ 1
1
Fig.D-6 (Specifications with Line filter)
Fig.D-7 (Specifications without Line filter)
W
iring diagram
Line filter
After passing Lead wires through
Line filer, put the line filter here.
Brush holder
complete
Switch
Seal
LED job light
Receive the tube for Lead wires
with the groove of Sponge A.
Lead wire holders
20
°
Brush holder
complete
Switch
LED job light
Do not put any Lead wires
on Seal.
Lead wires connected to each connector
have to be fixed into Lead wire holders.
Sponge A
Connectors
Tilt Insulated terminals on
Lead wires’ ends to
20
°
from the vertical line
on the machine.
Seal
Do not put any Lead wires
on Seal.
Lead wire holders
Lead wires connected to each connector
have to be fixed into Lead wire holders.
Receive the tube for Lead wires
with the groove of Sponge A.
Sponge A
