R
epair
[3] DISASSEMBLY/ASSEMBLY
[3] -1. Rotor (cont.)
(2) Before pushing Rotor section (Rotor and Stator) fully in Internal gear section, make sure that Rotor’s gear engages
with the two Super gears 22 of Internal gear section to rotate Spindle smoothly.
And then, mount them to Housing (L). (
Fig. 5
)
(3) Before assembling Switch to Housing (R), do not forget to mount F/R change lever to Switch. (
Fig. 6
)
(1) Assemble Rotor in the reverse order of disassembly. (Refer to
Fig. 2
)
Note
: Be careful not to pinch your fingers between Stator and Rotor’s fan when assembling them. (
Fig. 4
)
ASSEMBLING
Fig. 4
Fig. 5
Fig. 6
1. Holding Stator on workbench, insert Rotor into Stator slowly
until the drive end of Rotor reaches the workbench.
2. When the drive end of Rotor reaches
the workbench, lift up Stator slowly.
Rotor
Stator
Stopper projection of
Internal gear case complete
Mount Internal gear case section and Rotor section to
Housing (L) with the stopper projection on the groove.
Make sure that the ribs of Housing (L) are
fitted tightly in the notches of Stator.
Groove of Housing (L)
Stator
Notch of
Stator
Notch of
Stator
Rib
Rib
Housing (L)
Housing (L)
projection
prong portion
Engage the prong portion of F/R Change
lever with the projection of Switch
when assembling them to Housing (R).
P
5
/ 1
2