W
iring diagram
Wiring in Housing (L)
Fig. D-4
Stator
Terminal
Controller
Switch
Be careful not to put
Lead wires on these Ribs.
Be careful not to put
Connecting terminals
under or on Capacitor.
Printed wiring
board
Boss
Capacitor
Rib A
Rib D
Rib B
projection
of Controller
Projection
of Controller
Housing (L)
Housing (R) side
Controller
Terminal
While routing Lead wires connecting to
Terminal over the projection of Controller,
assemble Controller and Terminal to
Housing (L).
Be careful not to put Lead wires
on Ribs A, B and D.
Connecting terminal
Be careful not to put
Lead wires on this Boss.
Put the slack portion of Lead wires
of Stator and those of Printed wiring
board in this place.
Put one or more Lead wires
of Stator into both Lead wire
holders.
Route Lead wires of Circuit
board and those of Stator
between Rib A and Boss.
Fix Lead wires of Stator and
those of Circuit board in the
bottom of either Lead wire
holders.
P 1
1
/ 1
2