5
ENGLISH (Original Instructions)
Explanation of general view
SPECIFICATIONS
• Due to our continuing programme of research and development, the specifications herein are subject to change without
notice.
• Specifications may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
Intended use
ENE033-1
The tool is intended for screw driving in wood, metal and
plastic.
General Power Tool Safety
Warnings
GEA010-1
WARNING Read all safety warnings and all
instructions.
Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and
instructions for future reference.
CORDLESS IMPACT DRIVER
SAFETY WARNINGS
GEB054-1
1.
Hold power tool by insulated gripping surfaces,
when performing an operation where the fastener
may contact hidden wiring.
Fasteners contacting a
“live” wire may make exposed metal parts of the
power tool “live” and could give the operator an
electric shock.
2.
Always be sure you have a firm footing. Be sure
no one is below when using the tool in high
locations.
3.
Hold the tool firmly.
4.
Wear ear protectors.
SAVE THESE INSTRUCTIONS.
WARNING:
DO NOT let comfort or familiarity with product (gained
from repeated use) replace strict adherence to safety
rules for the subject product.
MISUSE or failure to follow the safety rules stated in
this instruction manual may cause serious personal
injury.
IMPORTANT SAFETY
INSTRUCTIONS
ENC007-4
FOR BATTERY CARTRIDGE
1.
Before using battery cartridge, read all
instructions and cautionary markings on (1)
battery charger, (2) battery, and (3) product using
battery.
2.
Do not disassemble battery cartridge.
3.
If operating time has become excessively shorter,
stop operating immediately. It may result in a risk
of overheating, possible burns and even an
explosion.
4.
If electrolyte gets into your eyes, rinse them out
with clear water and seek medical attention right
away. It may result in loss of your eyesight.
5.
Do not short the battery cartridge:
(1)
Do not touch the terminals with any
conductive material.
(2)
Avoid storing battery cartridge in a container
with other metal objects such as nails, coins,
etc.
1.
Red part
2.
Button
3.
Battery cartridge
4.
Switch trigger
5.
Lamp
6.
Reversing switch lever
7.
Bit
8.
Sleeve
9.
Bit-piece
10. Standard bolt
11. Fastening torque
12. Fastening time (S)
13. Proper fastening torque
14. High tensile bolt
15. Limit mark
16. Rear cover
17. Screws
18. Spring
19. Arm
20. Recessed part
21. Carbon brush cap
22. Hole
Model
BTD125
BTD143
Capacities
Machine screw
4 mm - 8 mm
Standard bolt
6 mm - 16 mm
High tensile bolt
6 mm - 12 mm
No load speed (min
-1
)
0 - 2,300
Impacts per minute
0 - 3,200
Overall length
153 mm
Net weight
1.4 kg
1.5 kg
Rated voltage
D.C.14.4 V
