P 2 / 7
R
epair
(1) Remove Ring spring from the groove on Anvil with retaining pliers or the like.
(2) Now Flat washer, Compression spring 13, Sleeve and Steel ball 3.5 (2pcs) can be removed from Anvil.
(3) Remove Anvil from Hammer case.
(1) Pull LED circuit out of housing by removing PT3x10 Tapping screw. ( Fig. 2)
(2) Remove stopper by removing PT3x16 Tapping screw. (Fig. 2)
(3) Remove bumper from hammer case. (Fig.3)
(4) Fit socket 30-78 (Part No.134847-1) over the hex
portion of hammer case.
And then remove hammer case from housing by
turning the socket clockwise as illustrated in Fig. 4.
Ring spring
groove
Compression spring 13
Steel ball 3.5 (2pcs)
Flat washer
Sleeve
Anvil
Fig. 1
Fig. 2
Fig. 4
Apply Makita grease N.No.2 to the
cylindrical portion of anvil before mounting.
[2] Removing Hammer Case Complete
[1] Disassembling Sleeve Section
(Fig. 1)
DISASSEMBLING
LED circuit
Tapping screw
PT3x10
Tapping screw
PT3 x 16
Stopper
Fig. 3
Hammer case
Hex portion
of hammer case
Socket 30-78
(134847-1)
Bumper
