3
ENGLISH
Explanation of general view
1-1. Switch
2-1. Speed adjusting dial
4-1. Dust bag
5-1. Dust nozzle
6-1. Dust nozzle
7-1. Groove
7-2. Front fixing cardboard
7-3. Front side of paper dust bag
8-1. Claws
8-2. Upper part
9-1. Notch
9-2. Guide
11-1. Holding tab
12-1. Dust box
12-2. Dust nozzle
13-1. Latch
13-2. Dust nozzle
SPECIFICATIONS
Model BO5030
BO5031
Paper size
125 mm
125 mm
Orbits per minute (min
-1
)
12,000
4,000 - 12,000
Dimensions (L x W x H)
153 mm x 123 mm x 153 mm
153 mm x 123 mm x 153 mm
Net weight
1.3 kg
1.3 kg
Safety class
/II
/II
• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
• Note: Specifications may differ from country to country.
ENE052-1
Intended use
The tool is intended for the sanding of large surface of
wood, plastic and metal materials as well as painted
surfaces.
ENF002-1
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and
can only be operated on single-phase AC supply. They
are double-insulated in accordance with European
Standard and can, therefore, also be used from sockets
without earth wire.
For Model BO5030
ENG101-1
For European countries only
Noise
The typical A-weighted noise level determined according
to EN60745:
Sound pressure level (L
pA
) : 80 dB(A)
Uncertainty (K) : 3 dB(A)
The noise level under working may exceed 85 dB (A).
Wear ear protection.
ENG211-1
Vibration
The vibration total value (tri-axial vector sum)
determined according to EN60745-2-4:
Work mode : sanding metal plate
Vibration emission (a
h
) : 4.5 m/s
2
Uncertainty (K) : 1.5 m/s
2
For Model BO5031
ENG101-1
For European countries only
Noise
The typical A-weighted noise level determined according
to EN60745:
Sound pressure level (L
pA
) : 80 dB(A)
Uncertainty (K) : 3 dB(A)
The noise level under working may exceed 85 dB (A).
Wear ear protection.
ENG211-1
Vibration
The vibration total value (tri-axial vector sum)
determined according to EN60745-2-4:
Work mode : sanding metal plate
Vibration emission (a
h
) : 4.0 m/s
2
Uncertainty (K) : 1.5 m/s
2
ENH101-9
EC-DECLARATION OF CONFORMITY
Model; BO5030,BO5031
We declare under our sole responsibility that this
product is in compliance with the following standards of
standardized documents;
EN60745, EN55014, EN61000 in accordance with
Council Directives, 2004/108/EC, 98/37/EC.
CE2008
000230
Tomoyasu Kato
Director
Responsible Manufacturer:
Makita Corporation
3-11-8, Sumiyoshi-cho, Anjo, Aichi, JAPAN
Authorized Representative in Europe:
Makita International Europe Ltd.
Michigan Drive, Tongwell, Milton Keynes, Bucks MK15
